Step 1: Pre-vacuum

This process ensures that larger debris and dust are removed from the surface layer of the carpet. Dry soil is removed by thorough power vacuuming. Removing dry soil is an essential  step in every carpet cleaning process.

Step 2: Pre-spray

100% bio-degradable, non-toxic detergent is applied to break down traffic area soil and general spots for a more thorough cleaning. This also provides a neutralizing and deodorizing effect and allows for any ground-in dirt to loosen itself from the carpet fibers.

Step 3: Pre-spot

Difficult spots are additionally pre-treated with appropriate solutions to increase chances of removal.

Step 4: Pre-grooming/Agitation

A professional carpet agitator is used to further loosen the soil. This step lets the cleaning solution to get down deep into the carpet fibers for a more thorough cleaning.

Step 5: Hot Water Extraction Cleaning and Rinse

This method is considered to be one of the most thorough extraction and deep cleaning methods available and is highly recommended by the world’s largest carpet manufacturers.

The professional high pressure hot water extraction unit uses hot cleaning solution up to 70 degrees C (160 degrees F) to lift away dirt, dust, bacteria, pollens and any detergent that has been applied.

The machine heats water to a high temperature, shoots the cleaning solution into the carpet at high pressure and produces a huge vacuum power to extract the dirt and chemicals out of your carpet.

Step 6: Turbo Drying

High-power air mover is placed on the carpet immediately after the cleaning process to cause faster drying.